Roland VG2-serien

Denne serie er udgået og erstattet af

Roland VG3 serien

"Større farverum og bedre printkvalitet - Roland VG2-serien er bygget til at præstere langt over standarden."

Tilfør dine print flere farver, flere detaljer og meget mere personlighed

Roland's VG2-serie kan med sin forbedrede print n' cut funktion, omfattende farverum og effektiviterede mekanik løfte din virksomhed til det næste niveau. Print i tusindvis af plakater, print på specialmaterialer eller print indpakningfolier til biler der matcher logofarven til din kunde.

Kreativitet 'ad libitum'

Fordele ved Orange & TR2 blæk

Roland VG2-serien logo matching vikiallo

Tilvælg orange og oplev forskellen

Den nye orange blæk gør det muligt at ramme logofarver i både det orange og røde spektrum. Omkring 130 nye spot-farver er gjort tilgængelige i det nye Roland Color Library

Roland VG2-serien rich color gamut vikiallo

Udvid farverummet med 'True Rich Color'

Løft allt du printer ved hjælp af det nye TR2-blæk. Blækket kombinere muligheden for neutrale gråtoner med bløde farveforløb og naturlige hudtoner, så du kan producere fotorealistiske resultater på selv komplekse illustrationer.

Roland VG2-serien media clamp2 vikiallo

Nyudviklede media clamps

Roland's nye, smarte media clamps er udformet så de ikke længere er i vejen når du laver 'sheet cut'. Faktisk kan de blive siddende, uden du nogensinde for brug for at tage dem af under din produktion!

Lav 'sheet cut' uden at skulle bruge tid på at fjerne dine media clamps

Roland VG2-serien VG2 TR2 ink vikiallo

Giv den gas med den nye TR2 blæk

Lav lækre, diskrete farvenuancer eller gå all in med sprælske farver. Vælg mellem 3 forskellige farvekonfigurationer: CMYK + LC, LM, LK + enten hvid eller orange. Du har muligheden for at at printe koncise farver til match med specifikke logofarver.

Vælg mellem 3 forskellige blækkonfigurationer, som giver dig uanede muligheder for farvemach på logofarver

Roland VG2-serien VG2 pinchrollers vikiallo

Automatiske pinch rollers

Som noget helt nyt er de midterste pinch rollere i sted til automatisk at løfte sig inden printeren begynder at skære. Du slipper for manuelt at skulle fjerne dem, og for at de køre henover det printede materiale. De yderste pinch rollere bliver selvfølgelig siddende, og holder dit medie helt lige for optimal præcision.

Automatiske pinch rollere spare dig for manuelt at skulle fjerne dem inden du begynder dit skærejob

Skarpe nye 'Cutting Features'

Roland VG2-serien multicrop vikiallo

Nye muligheder for 'Crop marks'

Brugerdefiner dine beskæringer med kun få klik. VG2-serien har forbedret præcision ved udskæring af lange baner af labels, transfer og dekorationer, alt sammen takket været den nye 'Crop mark by row' funktion i Versaworks 6. Ved avancerede skærejobs kan du også vælge 'crop mark by image'

Roland VG2-serien perfcut vikiallo

Oplev 'PerfCut mode'

Det har aldrig været nemmere at lave dekorationer eller klistermærker i en enkelt arbejdsgang! Med et par klik kan du i Versaworks 6 sætte dit job op til både print, kisscut og diecut i den rigtige rækkefølge.

Roland VG2-serien VG2 printer vikiallo

Bygget til at udbygge din virksomhed

Udviklet i Japan, med stor opmærksomhed for selv de mindste detaljer, er VG2-serien designet til passionerede folk som dig. Folk der har brug for kvalitet, pålidelighed og en printer med alsidige muligheder, der kan tage deres virksomhed til det næste level.


TrueVIS VG2 Series

VG2-640 VG2-540
Printing method Piezo ink-jet method
Media Width 12.4 to 64 in. (315 to 1,625 mm) 10.8 to 54 in. (275 to 1,371 mm)
Thickness Max. 39 mil (1.0 mm) with liner, for printing
Max. 16 mil (0.4 mm) with liner and 9 mil (0.22 mm) without liner, for cutting
Roll outer diameter Max. 8.3 in. (210 mm )
Roll weight Max. 88 lb. (40 kg) Max. 66 lb. (30 kg)
Core diameter (*1) 3 in. (76.2 mm) or 2 in. (50.8 mm)
Printing/cutting width (*2) Max. 63 in. (1,600 mm) Max. 53 in. (1,346 mm)
Ink Type TrueVIS INK 500 ml pouch (only white 250 ml)
Colors 8 colors (Cyan, Magenta, Yellow, Black, Light Cyan, Light Magenta, Light Black, and White)
8 colors (Cyan, Magenta, Yellow, Black, Light Cyan, Light Magenta, Light Black, and Orange)
4 colors (Cyan, Magenta, Yellow, and Black)
Printing resolution (dots per inch) Max. 1,200 dpi
Cutting speed 0.4 to 11.8 in/s (10 to 300 mm/s)
Blade force (*3) 30 to 500 gf
Blade Type Roland CAMM-1 series blade
Offset 0.0 to 59.1 mil (0.000 to 1.500 mm)
Software resolution (when cutting) 0.98 mil/step (0.025 mm/step)
Distance accuracy (when printing) (*4) (*5) Error of less than ±0.3% of distance traveled or ±11.8 mil (±0.3 mm), whichever is greater
Distance accuracy (when cutting) (*4) Error of less than ±0.4% of distance traveled or ±11.8 mil (±0.3 mm), whichever is greater
When distance correction has been performed (when the setting for [CUTTING MENU] - [CALIBRATION] has been made): Error of less than ±0.2% of distance traveled or ±3.9 mil (±0.1 mm), whichever is greater
Repeatability (when cutting) (*4) (*6) ±3.9 mil (±0.1 mm) or less
Alignment accuracy for printing and cutting (*4) (*7) ±19.7 mil (±0.5 mm) or less
Alignment accuracy for printing and cutting when reloading media (*4) (*8) Error of less than ±0.5% of distance traveled, or ±0.2 in. (±3 mm), whichever is greater
Media heating system (*9) Print heater set temperature: 86 to 112°F (30 to 45°C)
Dryer set temperature: 30 to 50°C (86 to 122°F)
Connectivity Ethernet (100BASE-TX/1000BASE-T, automatic switching)
Power-saving function Automatic sleep feature
Power requirements AC 100 to 120 V ±10%, 8.0 A, 50/60 Hz or
AC 220 to 240 V ±10%, 4.1 A, 50/60 Hz
Power consumption During operation Approx. 1,090 W
Sleep mode Approx. 40 W
Acoustic noise level During operation 63 dB (A) or less
During standby 53 dB (A) or less
Dimensions (with stand) 116 [W] × 28.8 [D] × 51.6 [H] in.
(2,945 (W) × 730 (D) × 1,310 (H) mm)
105.8 [W] × 28.8 [D] × 51.6 [H] in.
(2,685 (W) × 730 (D) × 1,310 (H) mm)
Weight (with stand) 451.9 lb. (204 kg) 421 lb. (188 kg)
Environment During operation Temperature: 68 to 90°F (20 to 32°C),
Humidity: 35 to 80%RH (no condensation)
Not operating Temperature: 41 to 104°F (5 to 40°C),
Humidity: 20 to 80%RH (no condensation)
Included items Dedicated stands, power cord, media clamps, media holders, replacement blade for separating knife, manuals, etc.
  1. *1 The media holders of this machine are designed to be used exclusively with media that has a paper tube (core) with an inner diameter of 3 inches. To use 2-inch media, the optional media flanges are required.
  2. *2 The length of printing or cutting is subject to the limitations of the program.
  3. *3
    • 500 gf is the maximum instantaneous blade force.
    • The blade force must be adjusted according to details such as the media thickness.
  4. *4
    • Media type: Media specified by Roland DG Corporation
    • Temperature: 25°C (77°F), humidity: 50%RH
    • Roll media must be loaded correctly.
    • Applicable when all pinch rollers that can be used with the media width are used.
    • Side margins: 25 mm (1.0 in.) or more for both the left and right margins
    • Excluding expansion/contraction of the media
    • Not assured when the print heater or dryer is used.
    • Assumes all correction and adjustment functions of the machine have been used properly.
  5. *5 Print travel: 1 m (39.4 in.)
  6. *6
    • [PREFEED] menu item must be set to "ENABLE."
    • Range for assured repetition accuracy
      • For media with a width exceeding 610 mm (24.0 in.): Length: 4,000 mm (157.5 in.)
      • For media with a width of 610 mm (24.0 in.) or less: Length: 8,000 mm (315.0 in.)
  7. *7
    • Provided that the media feed length is 3,000 mm (118.1 in.) or less
    • Excludes the effects of slanted movement and of expansion and contraction of the media
  8. *8
    • Data size:
      • 64-inch model: 1,000 mm (39.4 in.) in the media-feed direction, 1,600 mm (63.0 in.) in the carriage-movement direction
      • 54-inch model: 1,000 mm (39.4 in.) in the media-feed direction, 1,346 mm (53.0 in.) in the carriage-movement direction
    • No lamination
    • Automatic detection of crop marks at 4 points when media is reloaded
    • During cutting, [PREFEED] menu item must be set to "ENABLE."
    • Excluding possible shift caused by expansion/contraction of the media and/or by reloading the media.
  9. *9
    • Warm-up is required after power up. This may require 5 to 20 minutes, depending on the operating environment.
    • Depending on the ambient temperature and media width, the preset temperature may fail to be reached.